How can I sharpen serrated knives?
The knife set in my kitchen has a bunch of knives that are half serrated. They're the most commonly used knives of the set, and they're starting to be not so sharp. It's a bit awkward to use the sharpening tool, since I can't use it against the whole blade. Is there a better way to sharpen the knives, at least the unserrated part?
Speaking of Spyderco... Their Logo is "We made things sharp before we made sharp things"...
I have for many years sharpened serrated spyderco pocket knives (delica) by using a dremel tool with a small cone shaped stone to sharpen the serrations by running the stone down the trough of the serration. it leaves the knife edge a little ragged but they cut good.
This will not work on kitchen knives but since we were on the subject... The folks above have good suggestions for kitchen knives.
Ok, serrated knives are a challenge!!! Take a hard look at the diameter of the serrations on the blades. Then find a “rod” knife sharpener like these on Ebay
Or these,
http://www.ebay.com/sch/Kitchen-Dining-Bar-/20625/i.html?_from=R40&_nkw=ceramic+rod+knife+sharpener
Although there maybe duplications between the links, I am sure you have the concept. Find the akin rod and spent some enjoyable time and fun putting a respectable cut into your knives.
I would send it out. There are usually some knife sharpening services around including at the butcher counter at your grocery store and nearby cooking schools. They usually charge by the inch, i.e. the one I go to charges .75/inch for straight edge and $1.50/inch for serrated so it's a nominal charge really. You can get rod and DIY and you'll have paid for the rod with a couple knife sharpening.
It depends on the type of serrations. hyper fine serrations should be sent out; but if they are what many people consider "common" serations here is a guide.
http://www.sharpeningsupplies.com/How-to-Sharpen-a-Serrated-Knife-W19C60.aspx
6 Answers answer
Sort By: